No, an 11 speed road shifter has a different pull ratio than an 8, 9 or 10 speed. Any 8, 9 or 10 speed road shifter will work with any 8, 9 or 10 speed road rear derailleur (unless it's Tiagra 4700). However, the 11 speed road system pulls more cable per shift and therefore is not backwards compatible.
Can I replace a 9 speed cassette with a 11 speed?
Condensed answer: A 9-speed MTB hub can accept an 11-speed MTB cassette. However, a 9-speed Road hub is not compatible with an 11-speed Road cassette.
Can I use a 10 speed rear derailleur with a 9 speed shifter?
Condensed Answer: 10-speed Shimano and SRAM MTB derailleurs have a different rear shift ratio than 9-speed derailleurs and cannot be effectively combined with a 9-speed shifter and cassette.
Can I use a 10 speed cassette with an 11 speed derailleur?
Can An 11-speed Derailleur Work With a 10-speed Cassette and Shifter? Condensed Answer: Shimano's 11-speed derailleurs have a different rear shift ratio than 10-speed derailleurs and are therefore not compatible with 10-speed indexed shifters.
Does derailleur need to match cassette?
The rear derailleur must be matched to the size of the largest rear sprocket. This capacity, which is expressed in terms of teeth, accounts for both the difference in size between both chainrings (e.g. 14T for a 53/39T crankset) and the largest and smallest sprockets on the bike (e.g. 17T for an 11-28T cassette).
15 related questions foundCan I use any cassette with any derailleur?
As a general rule of thumb, it's best not to mix and match drivetrain components from different brands. While things such as cranks, chains and cassettes are mostly inter-compatible between brands, generally speaking, shifters and derailleurs aren't.
Can I use a 9 speed derailleur on a 7-speed cassette?
Can I use a 9-speed derailleur on a 7-speed cassette? The answer is yes because the rear shift ratio of 9-speed and 7-speed derailleurs is the same if you stay within the same brand.
Are 10 and 11 speed derailleurs the same?
the 10 speed and 11 speed derailleurs are interchangeable as far as the shifters go, the difference is that a 10 speed derailleur doesn't like a cassette cog much bigger than the 36t it was designed for, where the 11 speed derailleurs are designed for 40 and 42t cogs, and seem to be able to handle bigger.
What is the difference between a 10 speed and 11 speed cassette?
Tighter spacing on cassettes AND wider range from top to bottom of cassette are possible in the same cassette with 11 vs 10. This can make a pretty big difference when climbing. 4. The 11 speed stuff just shifts better than the comparable line of 10 speed components, it's actually quite noticeable.
Can I use an 11 speed crank on a 10 speed bike?
Registered. An 11-speed crank will perform equally well on a 10-speed system. No one has shown that there is any difference in ring spacing. The chains have the same internal width, so don't know the difference.
Can I use a 9 speed shifter with a 10 speed cassette?
A 9-Speed Derailleur Can Work With a 10-Speed Cassette Only On Road Bikes. Luckily, the rear shift ratio of Shimano's road bike groupsets is the same for 8, 9, and 10-speed transmissions. Hence why it's possible to combine a 9-speed derailleur with a 10-speed cassette.
Are all 9 speed chains compatible?
Chain width is about 6.7 mm.
Front chainrings are less sensitive to the thickness of chain used. Otherwise, all the 9 speed chains will work well, regardless of the manufacturer: Campagnolo, SRAM and Shimano.
Are 9 and 10 speed cassettes interchangeable?
9- and 10-speed cassettes will both fit on the same wheel. The splines are the same for each. If you run your 10-speed shifters in friction mode (not possible if you're using STI "brifters" , then you can use either cassette on that system.
Can you make a 9 speed bike an 11 speed?
Converting a 9-speed wheel to 11-speed
You will have to buy a new 11-speed wheel and replace the entire wheel. On the other hand, if your current wheel is an 11-speed wheel, you can convert it to 11-speed by removing the low spacer from the low side of the 9-speed sprocket and installing an 11-speed sprocket.
Do SunRace Cassettes fit Shimano hubs?
SRAM, SunRace, IRD: mostly compatible
Most cassette hubs are compatible with Shimano cassette cogs. SRAM cassettes and most Miche, IRD and SunRace cassettes use the same inter-sprocket spacing as Shimano, but at least some SRAM 10-speed cassettes do not fit aluminum-body Dura-Ace hubs.
Can you fit an 11 speed cassette?
Luckily, many common and not-so-common wheelsets, as long as they're at least 10-speed, can be upgraded to 11-speed by purchasing a new cassette body. The body is the part that attaches to the center of the hub and drives the wheel and bike when you pedal.
What is faster 9 speed or 11 speed?
11-speed cassettes are absolutely not faster than 9-speed cassettes. The factor that determines the speed of your bike is you; the rider. Putting an 11-speed cassette on your bike will not magically produce more speed. It will, however, allow you to find the correct gear more easily.
What is a 9 speed cassette?
Road cassettes typically feature 9, 10 or even 11 sprockets with narrower jumps in gears offering smoother shifts to help achieve optimum cadence (number of pedal revolutions per minute). Most road cassettes will feature a 12-tooth sprocket as the highest gear with a low gear of between 25 and 32 teeth.
Can I use a 10 speed derailleur on a 12 speed cassette?
-10 speed shifter sets your throw to match the rear cassette. -chains have the same outer dimension, the 12 speed derailleur would have narrower cogs than what required for a 10 speed. -As long as you can set the high/low limits on the derailleur to keep it on the cassette it should be fine.
Can I use 12 speed derailleur with 11 speed cassette?
So there you go folks, there is no difference in indexing spacing between 11 and 12 speed, the difference is all at the derailleur end. So you can't use a 12 speed derailleur on an 11 speed setup or vice versa but you can you an xtr 12/11 speed shifter on an 11 speed drivetrain.
Can I use a 9 speed shifter with a 7 speed cassette?
If you used a 7 speed cassette, with a 9 speed shifter and 7 speed derailleur you would not pull enough cable and the shifts will get mangled. If you are currently on 7 Speeds, this means you have a 7 speed wheel that will most likely NOT take a 9 speed cassette.
Are SRAM and Shimano 9 speed cassettes interchangeable?
In some cases, it is possible to run a cassette from a different brand than the rest of your drivetrain. SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.
Can I use a 10 speed derailleur on a 7 speed cassette?
If you have a 10-speed derailleur of any kind, it will work with a 7-speed cassette as long as you use friction shifters.
Can I use Microshift cassette with Shimano derailleur?
Microshift 10 Speed Cassettes are 100 percent compatible with Shimano and SRAM rear derailleurs and shifters, and also with freehubs that work with Shimano and SRAM. They also work with Microshift shifters and derailleurs.
