The opposite of courtesy staging is generally called double bulbing. Which is when a racer turns on the first and second stage bulb before their opponent turns on their first bulb. Sometimes this is just inexperience. Sometimes it's gamesmanship on the part of the racer.
What does deep mean in racing?
Deep staging is the practice of rolling forward enough to turn off the prestage light. The thought behind this is you are closer to the finish line than your opponent.
What is the 60 foot in drag racing?
60 FOOT TIMER
Measures the time it takes the car to cross the first 60 feet of the quarter-mile. This shows you how well the car launches, which affects your elapsed times. Most street-tired cars have 60 foot times around 2 seconds.
How do you stage a dragster?
To deep stage, roll the car up until you trigger the prestage and stage lights, then move forward slowly until the prestage bulbs go out. This puts more of your front tires ahead of the stage beam—and less tire that needs to go through the stage beam and trigger the ET clock.
How do drag race winners get determined?
The first vehicle to cross the finish line is declared as the winner. The winner is the driver who has the lowest reaction time and elapsed time both. The elapsed time doesn't determine the winner. It only measures the performance.
28 related questions foundWhat does 1320 mean in drag racing?
The 1320 part of its name comes from the distance in feet in a quarter mile. Don't let its normal Challenger looks fool you: This Scat Pack 1320 is the fastest naturally aspirated showroom stock drag car you can buy. Dodge.
What does a hole shot win mean in drag racing?
Holeshot Win
When a racer with an e.t. slower than that of his or her opponent wins an eliminations round because he or she had a better reaction time, or left the starting line first.
Why do drag racers bump in?
Bumping is when the transmission releases all the pressure on the reverse gear for a specified amount of time, allowing the car to "bump" forward. "Creep" is allowing the transmission to release some of the pressure for the duration of the time the driver holds the Secondary button.
What do the lights in drag racing mean?
Each race is started by an electronic device commonly called a Christmas Tree. On each side of the Tree are six lights: a circle of small blue lights at the top — the top half for pre-staging and the bottom half for staging — three larger amber bulbs, a green bulb, and a red bulb.
How does a Transbrake work in drag racing?
A transbrake is activated by a driver-controlled switch that connects to a solenoid mounted on the transmission. When engaged, the transbrake applies forward/low gear and reverse at the same time. Working against each other, the vehicle is unable to move, and is effectively locked in position on the starting line.
Why is a drag strip 1/4 mile?
Traditionally, a drag strip is 1,320 feet, which equals a quarter-mile. (One mile equals 5,280 feet.) Many classes in NHRA drag racing—actually, all but the Top Fuel and Funny Car classes—still compete on a quarter-mile course.
What does ET mean in racing?
Car with doors. Elapsed Time (E.T.) The time it takes a vehicle to travel from the starting line to the finish line. Eliminations. When vehicles are raced two at a time, resulting in one winner and one loser.
What does dial in mean in drag racing?
A dial-in time is used to establish a handicap start in a bracket race. The dial-in is the driver's estimated elapsed time (ET) their car will run in competition, and allows just about any two vehicles to compete with a handicap start.
What does pro tree mean in drag racing?
The Pro Tree is when all three amber lights flash simultaneously followed four-tenths of a second later by the green light ( green is when you gas the vehicle forward).
What is courtesy staging in drag racing?
Courtesy Staging
1. Some tracks employ a Courtesy Staging rule, at the MSHS Courtesy Staging is enforced. This means that the first car into the staging beams should light only the pre-stage light. When the second car is is pre-staged, then either of you can move up slightly into the staging lights.
Why do drivers do burnouts?
Burnouts can help remove unwanted debris
Performing a burnout can help to remove any foreign matter or unwanted debris that may have collected on the tires before the race, particularly if the vehicle was coming from the pits.
What are drag racing lights called?
Modern drag races are started electronically by a system known as a Christmas tree. A common Christmas tree consists of a column of seven lights for each driver or lane, as well as a set of light beams across the track itself.
What does it mean to knock the tires off?
Knock the tires off/blow the tires off - Spinning the tires during the pass. Tree'd [someone]/Treeing [someone] - Getting off the starting line first without jumping. Rotating the Earth - Making a fast pass. Jump - Leaving before the flashlight is turned on (false start), usually resulting in an instant loss.
What is a Davis box?
Don't roll through the beams anymore or be forced to stage too deep. With Davis technologies Bump Box you can precisely stage your car in small increments giving you consistency at the tree. The Bump box does not replace your transbrake but works with it allowing you more control at staging.
What is the scramble button in drag racing?
scramble boost is an overboost feature normally activated with a switch. Say for example you normally run 10psi, you can have a little switch that knocks it up to 15psi for a given amount of time.
Why do drag cars jump at the line?
With the spool valve in its normal position hydraulic fluid pressure in the transmission is removed from the reverse clutch pack (but maintained in the forward clutch pack), this causes the drag race car to "launch" (often with great thrust) from the starting line, accelerating rapidly forward toward the finish line.
Why is it called a hole shot?
The holeshot is a term used in motocross to describe or reference the first racer to get through the apex of the first turn. Getting the holeshot gives the rider a huge competitive advantage and some level of control in the race.
What does a hit mean in racing?
To get the "go", jump, break, hit, kick, or move is to start the race without the flagger. This is another system of handicapping that requires one car to wait until they see the other car start to move before they are allowed to leave their starting line.
